Simple 90° Detailer™ Carbide Tipped Lathe Tool

The modern alternative to conventional spindle scrapers and detailing tools

---

The introduction of carbide tipped wood turning tools has greatly simplified wood turning.

Spindle and detail turning now begins as soon as your tool arrives. Gone forever is the long process of mastering spindle and bowl gouge detailing techniques and tool presentation. Another thing that won't be missed is the need to master many sharpening techniques before you can even begin to turn, not to mention the expense of all that sharpening equipment.

Now with Simple Wood Turning Tools it’s all turning and no sharpening so you can start turning immediately.

To use the Simple 90° Detailer just follow these 3 simple steps:

1.  Position the tool rest as close to the work as possible so the carbide cutter is at the lathe center line.

2.  Place the tool on the tool rest with the tool shaft parallel with the floor.

3.  While securely holding the tool keep the flat bottom in constant contact with the tool rest and slowly plunge the carbide cutter into the work.

As soon as the razor sharp tip hits the wood you will be amazed how fast this tool cuts and how quickly you'll form details on your spindles and bowls. 

In addition to detail work the sharp point of the Simple 90° Detailer makes it an amazing tool for hollowing out bowls turned from really hard wood, or any other wood for that matter. Simply pierce the point into a vessel you're hollowing, then move the tool back and forth and you'll see the inside of the vessel rapidly turned to chips. One note here: It's best to not pierce the tool more then ½" into the vessel before moving sideways. 

This tool is also great for cutting perfectly square tenons and inside corners.

Simple 90° Detailer  technical details:

•  Carbide cutter - 9/16" square with very sharp corners
•  Overall tool length – 12"
•  Tool Shaft – Solid steel  ½" square with clear zinc plating 
•  Handle tang - ½" diameter x 2½" length
•  Simple interchangeable handle for this tool is available HERE

Here's a few comments we've received from customers:

One of the best tools I've got

Fantastic! Shipped the next day and received very quickly. Will buy from again!

Great tools, I own two now and I really enjoy them! Thanks much.

Excellent transaction, fast ship, item as described, will buy again thanks A++++

This tool is also available in the mini pen turners size HERE

See the full line of Simple Wood Turning Tools & accessories 

See the Simple Wood Turning Tools line of tools listed below HERE

• Simple Rougher™
• Simple Shear Cutting Finisher™
• Simple 55° Detailer™
• Simple 90° Detailer™
• Simple Interchangeable Handle™
• Simple Wood Turning Tools are made in America by Harrison Specialties LLC

Any questions just email, we're glad to help.

Watch a YouTube demonstration below:

Vacuum chuck for your wood lathe available HERE