You get these 4 tools in this set:
- Simple Scraper - The widest and most unique carbide scraper on the market. (our newest tool!) The oval negative rake carbide cutter is included.
- Simple Rougher (SR) - Normally the first tool to create the basic shape. A 90° square carbide cutter is included.
- Simple Turner and Hollower (STH) - This tool makes gentle curves inside and out and refines the shape.
- Simple 55° Detailer (S55D) - Get creative with this tool and make fine details. Also, perfect for making a dovetail tenon for holding turnings in a 4 jaw chuck.
17" Solid aluminum polished handle comes with a soft comfortable foam rubber grip. Handle is interchangeable or order additional handles for convenience.
The Simple Scraper widest carbide scraper tool comes with an oval shaped negative rake carbide cutter. The oval cutter is great for shaping and finishing, combining the usefulness of a square AND round cutter into a single tool.
The Simple Rougher carbide tool makes roughing much simpler & less physical as most of the shock created by interrupted cuts is absorbed in the tool rest instead of your hands & arms. CNC machined from ½” square stainless steel, 12" overall length with 9.5" of tool reach.
The Simple Turner & Hollower is the simplest to use carbide tool on the market. You’ll appreciate the simplicity with which your project can be quickly turned & hollowed to the desired shape using this tool. CNC machined from ½” square stainless steel, 12" overall length with 9.5" of tool reach.
The Simple 55 Detailer carbide tool that provides a much higher level of woodturning creativity. CNC machined from ½” square stainless steel, 12" overall length with 9.5" of tool reach.
How Do I Use the Simple Scraper?
Held flat on the tool rest it's a scraper.
Riding the bevel with it pointed up creates a cut similar to a bowl gouge leaving an improved finish.
While riding the bevel roll it on an edge and it makes a shearing cut reducing tear out leaving a silky smooth finish.
Simple Scraper Details:
- Carbide cutter size: 1.18" x .50" x .10" thick
- Tool measures 1" wide x 3/8" thick x 8" long. Handle tang is 3/8" square (fits in 1/2" hole) x 2.5" long, so tool length once it's in the handle is 5.5".
Simple Scraper Benefits:
- The widest and most unique carbide scraper on the market.
- Beneficial on every project from small pens to large bowls and everything in between because you can shape and finish with a single tool.
- Quickly remove tool marks and create silky smooth profile transitions between inside and outside curves, as well as straight wave free lines.
- Makes a perfectly flat bottom with a smooth transition to the inner wall using the oval cutter, or a square inside box corner using the rectangular cutter.
- Creates a smooth finish with much less tearout and minimal sanding.
- A pen turners dream tool. It's the only tool needed to turn virtually any pen.
Simple Scraper Cutters:
The oval cutter is great for shaping and finishing, combining the usefulness of a square AND round cutter into a single tool.
- Oval cutter (for wood)- The oval cutters are perfect for virtually any curved shape imaginable especially on the outside of your project.
- Oval negative rake cutter (for epoxy/resin, hybrid and wood) (INCLUDED)- Like the oval cutter but the negative rake grind also makes this cutter less aggressive. This reduces chipping in very hard materials (epoxy/resin), can reduce tear out in softer materials and provides a great finish in both man-made materials and harder woods. Because the negative rake grind is less aggressive, many people find it easier to use.
The rectangular cutters make it simple to create square inside corners, beads and straight lines. Perfect for the inside and outside base of any project.
- Rectangle cutter (for wood)- This cutter shines on the outside of bowls, hollow forms, vases, platers, and wooden pen blanks. You'll also love it for simple spindle work too. Another place you’ll love this cutter is on the inside of a box.
- Rectangle negative rake cutter (for epoxy/resin, hybrid and wood)- Like the rectangle insert but the negative rake grind makes this cutter less aggressive. This reduces chipping in very hard materials, can reduce tear out in softer materials and provides a great finish in both man-made materials and harder woods. Because the negative rake grind is less aggressive, many people find it easier to use.
Replacement carbide cutters can be found here
100% made in the USA by American craftsman. CNC machined from solid aluminum for balance, durability, and to last for years. Covered with a soft, comfortable foam rubber grip to reduce hand cramping during long turning sessions and for great tool control. Overall length is 17"; outside diameter is 1 3/8"; tool opening is ½" diameter. Tools can be easily changed by loosening the two stainless steel set screws.
Video Demo on 3 Square Tools:
Videos Hide Videos Show Videos
The Simple Scraper Shaping and Finishing Tool for Woodturning
The Simple Scraper demonstrated with all 4 cutter options. Thi...
The Simple and Safe Way to Hollow a Bowl on a Wood Lathe
The Simple Hollowing System demonstrated. https://www.simplewo...
Turning a Pen using Full Size Carbide Tools
Can I turn a pen with full size carbide tools? We show the ans...